LANGUAGE
Menu Language
Select a language for the Setup menu and
Disc Audio/ Disc Subtitle/ Disc Menu
Select the language you prefer for the audio Track (disc audio), subtitles, and the disc menu
Original: Refers to the original language in which the disc was recorded.
Other: To select another language, press numeric keys then [ENTER] key to enter the corresponding digit number according to the language code list (See page 21.). If You enter the wrong Language code, press [CLEAR] key.
DISPLAY
Progressive Scan | Off |
TV Output Select | RGB |
TV Aspect
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the upper and lower portions of the screen.
Panscan: Automatically displays the wide Picture on the entire screen and cuts off the portions that do not fit.
Progressive Scan
If you are using the COMPONENT VIDEO jacks, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to "Off".
If you are using the COMPONENT VIDEO jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to "On".
When "On" is selected, the confirmation screen for switching to Progressive Scan appears. In case of a TV not compatible with Progressive Scan, the screen disappears and return to the original display is made after 10 seconds.
Note:
Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit.
TV Output Select
Set the player's TV Output Select options according to the TV connection type.
For Europe;
RGB: When your TV is connected with the SCART jack.
Y Cb Cr: When your TV is connected with the COMPONENT VIDEO jacks on the DVD player.
For Australia; |
| |
Preparations | ||
S: When your TV is connected with the S VIDEO jack. | ||
| ||
Y Cb Cr: When your TV is connected with the COMPONENT |
| |
VIDEO jacks on the DVD player. |
| |
Screen saver |
|
The screen saver appears when you leave the DVD player in stop mode for about 5 minutes. If the Screen saver is displayed for 5 minutes, the DVD player automatically turns itself off.
AUDIO
Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use.
Dolby Digital/ DTS/ MPEG
Bitstream: Select "Bitstream" if you connect the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.
PCM (for Dolby Digital/ MPEG): Select when connected to a
Off (for DTS): If you select “Off'', the DTS signal is not output through the DIGITAL OUT jack.
Continued to next page
English 17