Manuals / Brands / Home Audio / Stereo Equalizer / Kenwood / Home Audio / Stereo Equalizer

Kenwood G-EQ300 Operation in GRAPHIC mode, 3Select the “GRAPHIC” mode, 4Select the frequency band to be adjusted, 5Adjust its level, 6Fine adjustment of each frequency band:

1 28

Download 28 pages, 659.86 Kb

This mode allows to adjust the equalizer curve for each frequency band provided. The curve created in the parameter mode can be fine-adjusted in this mode.

Creation of desired equalizer patterns

G-EQ300 (En/K)

1 7

Operation in GRAPHIC mode

1Select the “graphic equalizer display mode”.

Each press switches the display modes as follows.

DISPLAY

1 Graphic equalizer display mode

2 Spectrum analyzer display mode

3 DEMO(Demonstration) mode

2Select the “EQ.ON” mode.

EQ.EFFECT

3Select the “GRAPHIC” mode.

GRAPHIC/

PARAMETRIC

4Select the frequency band to be adjusted.

FREQUENCY JOG

“EQ. ON” lights up.

EQ. ON

Each press switches the display as follows.

1 GRAPHIC

: Mode for adjusting equalizer curves.

2PARAMETRIC: Mode for creating a curve according to center frequencies.

“GRAPHIC” lights up.

GRAPHIC

2 5 K H Z

5Adjust its level.

EQ.LEVEL

1k 1.5k 2.5k 3.9k 6.3k

6Fine adjustment of each frequency band:

Repeat steps 4 and 5 above.

If the mode is switched from “GRAPHIC” to “PARAMETRIC”, the equalizer pattern created in the GRAPHIC mode is cleared.

Note

Contents

Page Introduction Safety precautions Special features Large FL display, 14-bandequalizer and 27-spectrumanalyzer Contents Accessories IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS POWER OFF Before operation Maintenance Names and functions of parts System connections About the system control connections System connections About the system control operations Display Switching the display modes 1Press the ON/STANDBY key to turn the unit ON 2Select the desired display mode Demonstration method 1Play a music source 2Select the “DEMO” mode Operation of graphic equalizer Operation of MANUAL feature 2Select the “EQ.ON” mode 3Set to “MANUAL“ 4Select an equalizer pattern Operation of REFERENCE feature 3Set to “REFERENCE” Equalizer pattern list Creation of desired equalizer patterns Operation in PARAMETRIC mode 1Select the “graphic equalizer display mode” 3Select the “PARAMETRIC” mode 4Select the key to store the center frequency 5Select the center frequency 6Adjust the level 7Select the inclination of the curve Operation in GRAPHIC mode 3Select the “GRAPHIC” mode 4Select the frequency band to be adjusted 5Adjust its level 6Fine adjustment of each frequency band: Registration of EQUALIZER pattern 1Create a desired equalizer pattern 2Preset the equalizer pattern 2Initiate the GENRE mode 3Select the genre of music 4Select the desired tone pattern 5Select the purpose of use of the pattern Major purposes of use provided by the USE keys Use of equalizer effect with tape Applying equalizer effect to tape playback 1Set the TAPE switch to ON 3Create a desired equalizer pattern 4Play a tape Tape recording of sound with equalizer effect 1Set the TAPE switch to OFF 4Play the source to be recorded 5Start recording it onto tape Functions of the graphic equalizer In case of difficulty Specifications For the U.S.A FCC WARNING NOTE: Page For your records