HD-5MD/EN
60
Application
MD Edit Functions
P.CALL
TITLE INPUT
L
R
3010 5310(–dB)
MD
DIGITAL

Assigning a title (name) to a minidisc or a track

It is possible to give a title to a minidisc or a track. The same method can be used to change or erase a
title which has been entered. When ON has been selected for the STAMP function in extended recording
mode (LP2 or LP4), LP: will be displayed automatically in front of the title.
It is also possible to give a title to a group. (Group title)
In addition, there is a memo function for storing characters for repeated input.

Preparations for assigning a title

Assigning a disc title:

A title can be assigned when the unit is stopped in group playback mode.
If "GROUP" or "PGM" is lit, press the P.MODE key to make it go out.

Assigning a group title:

A title can be assigned in stopped condition in group playback mode.
1Press the P.MODE key and light the "GROUP" indication.
2Press the PREV. or the NEXT key to select the group which is to be given a group title or a track title.

Assigning a track title:

In normal stop mode, titles can be given to all tracks.
When the unit is stopped in group playback mode, titles can be given to the tracks in the group.

Input of a title memo:

Title memo can be selected in any of the above modes.
Remote control unit only
1Press the "TITLE INPUT" key.
2Press the 4P.CALL¢ keys re-
peatedly to select the title to be
edited.
When the editing is to be abandoned, press the
"TITLE INPUT" key to stop the editing.
÷Title input is not possible while the minidisc read/write
indication is flashing.
"...." will be displayed when no name
has been assigned.
÷The name to be edited will be switched each time
the key is pressed.
"DISC" :(DISC TITLE)
"001" :(TRACK TITLE)
"002" :(TRACK TITLE)
"[1]" :(TITLE MEMO 1)
"[2]" :(TITLE MEMO 2)
"[3]" :(TITLE MEMO 3)
When a group has been selected, the group number will
be displayed.
Continued on next page