10 EN

To search a desired file by file name

1Press FILE SEARCH button on the remote
control.
2Press the digit buttons to enter the first char-
acter of the file name you wish to search and
press ENTER button.
Repeat this procedure to enter the rest of the
file name.
3Press FILE SEARCH button on the remote
control.
4Press 6 button to start playback.

Programming tracks

Programming tracks of a disc is possible when
playback is stopped. Up to 60 tracks can be stored
in the memory in any order.
1In stop mode, press program button on the
unit (PROGRAM button on the remote control)
to enter program setting.
The icon “PROGRAM” and “– – P–01” will
appear on the display. “– –” indicates track
number of the CD and “P–01” indicates pro-
gram number.
2Press 4 or ¢ button (4 or ¢ SEARCH/
TUNING button on the remote control) to se-
lect the desired track.
The digit buttons (0~9) on the remote control
can also be used to select tracks.
The icon “PROGRAM” and program number
will start flashing.
3Press program button on the unit ( PROGRAM
button on the remote control) to store the se-
lected track.
The track number returns to “– –” and the next
program number will appear on the display.
4Repeat steps 2 to 3 to select and store other
desired tracks in this way.
The icon “PROGRAM” will appear on the dis-
play and “FULL” will start flashing if you attempt
to program more than 60 tracks.
Press program button on the unit ( PROGRAM
button on the remote control) in stop mode to
review the program sequence.
5Press 6 button to play the programmed
tracks.
If you press REPEAT button on the remote
control during programmed playback, the cur-
rent track or all programmed tracks will be
played repeatedly.
The icon “REPEAT” or “REPEAT ALL” and the
icon “PROGRAM” will appear on the display.
6Press 7 stop button once to stop program play-
back or twice to clear the program.
The icon “PROGRAM” will disappear from the
display.
Programming tracks (For MP3-CD only)
Programming tracks of a disc is possible when
playback is stopped. Up to 60 tracks can be stored
in the memory in any order.
1In stop mode, press program button on the
unit (PROGRAM button on the remote control)
to enter program setting.
The icon “PROGRAM” and “– – – P–01” will
appear on the display. “– – –” indicates track
number of the MP3-CD and “P–01” indicates
program number.
2Press p.call/album up or down button to se-
lect the desired album and press 4 or ¢
button (4 or ¢ SEARCH/TUNING button
on the remote control) to select the desired
track.
The digit buttons (0~9) on the remote control
can also be used to select tracks.
The icon “PROGRAM” and program number
will start flashing.

Using the CD/MP3-CD

*5469/08-20/EN 04.6.1, 11:20 AM10