15 EN
Using the cassette
4Press 6 or button to begin recording.
5Press 7 stop button to end recording.
6To turn off radio, press TAPE mode button to
TAPE.
Radio recording tip
•To temporarily pause the recording, press rec
button (REC button on the remote control).
Press 6 or button to resume recording.
Recording from a CD/MP3-CD
1Insert a blank cassette tape into the tape deck.
2Press CD button to CD.
3Insert a CD/MP3-CD and select the first track
you want to record.
4Press rec button (REC button on the remote
control) to set the unit into recording standby
mode.
The icon “REC.” appears on the display.
5Press 6 or button to begin recording.
The icon “REC.” and the icon “SYNC” will ap-
pear on the display.
The track you have selected in the step 3 will
be played from the beginning.
6Press rec button (REC button on the remote
control) to interrupt or edit recording. Press 6
or button to resume recording.
7Press 7 stop button to end recording.
Notes:
•To ensure good system performance, wait until the
unit completely reads the disc before recording.
•During recording, it is not possible to listen to an-
other source.
•You can program tracks and record onto a cassette
tape. If you wish to record only one track, program
that track first, and then record it. (See page 10)
•If you perform the step 4 and 5 during the play-
back of a normal CD, the recording will start from
the beginning of the current track.
During the playback of a MP3-CD, the recording will
start from the point where the step 4 and 5 are
performed.
*5469/08-20/EN 04.6.1, 11:20 AM15