Kenwood HM-682MD Front cover, Specifications, Removing the front cover, Attaching the front cover, Speakers

Front cover

Specifications

Removing the front cover

⎟Pull the ring-shaped handle to remove the front cover.

Attaching the front cover

⎟Align the projections on the top edge of the main unit with the holes on the back of the front cover, and push in gently to attach the front cover to the main unit.

Main unit

[Amplifier section]

Rated output power during STEREO operation

1 kHz, 1.0 % T.H.D., at 6 Ω ............. 15 W + 15 W

Effective output power during STEREO operation

1 kHz, 10 % T.H.D., at 6 Ω		.............. 20 W + 20 W
Frequency response
AUX ........................	50 Hz~50 kHz (0 dB ~ -3dB)
[Tuner section]
FM tuner section
Tuning frequency range .....		87.5 MHz ~ 108 MHz
MW (AM) tuner section
Tuning frequency range .....		531 kHz ~ 1,602 kHz
[MD recorder section]
Laser wave length ...........................		765 to 805 nm
Laser power class ......................................		Class 3A
Laser ......................................		Semiconductor laser
Recording method ....	Field modulation overwrite
method
Audio compression
ATRAC (Adaptive TRansform Acoustic Coding)
D/A Conversion ................................................		1 Bit
Wow & flutter ........	Less than unmeasurable limit
[CD player section]
Laser wave length ...........................		760 to 800 nm
Laser power class ......................................		Class 3A
Laser ......................................		Semiconductor laser
D/A Conversion ................................................		1 Bit
Oversampling ................................		8 fs (352.8 kHz)
Frequency response	............	20 Hz~20 kHz, ± 1 dB
Wow and flutter ....	Less than unmeasurable limit
[General]
Power consumption .......................................		60 W
Dimensions
(Horizontal installation)
......................................		W : 220 mm (8-11/16")
		H : 150 mm (5-7/8")
		D : 368 mm (14-1/2")
(Vertical installation)
......................................		W : 142 mm (5-9/16")
		H : 228 mm (9")
		D : 368 mm (14-1/2")
Weight (net) .......................................		6 kg (13.2 lb)

Speakers

Enclosure .................................	BASS RE-FREX type
Speaker configuration
Woofer ................................		100 mm, cone type
Tweeter ...............................		19 mm, dome type
Impedance ............................................................		6 Ω
Maximum input level .........................................		30 W
Dimensions
(Horizontal installation)
......................................	W :	220 mm (8-11/16")
	H :	150 mm (5-7/8")
	D :	252 mm (9-15/16")
(Vertical installation)
......................................	W :	142 mm (5-9/16")
	H :	228 mm (9")
	D :	252 mm (9-15/16")
Weight (net) .........................	2.8 kg (6.2 lb) (1 piece)

	KENWOOD follows a policy of continuous advancements in development. For this reason specifications
Notes	may be changed without notice.
	⎟ Sufficient performance may not be exhibited at extremely cold locations (where water freezes).