Controls
This is a 4 channel amplifier including 2 stereo amplifiers in a body. One amplifier is referred to as amplifier A and the other is amplifier B. This unit is compatible with a large variety of systems by combining the switches and functions described in the following.
5
FUSE(25A)
25
| POWER IN | SPEAKER OUTPUT | BRIDGED |
| SPEAKER LEVEL INPUT |
| |
| GND |
| LEFT | RIGHT | LEFT | RIGHT |
|
| A |
|
|
| A |
| |
|
|
|
| SPEAKER LEVEL INPUT | |||
BATT | P.CON(REMOTE) |
|
|
|
| A | |
|
|
|
|
|
|
| |
|
|
|
|
|
| B | B |
|
| B |
|
|
| L | R |
1 | 2 3 4 | 6 | 7 |
89 0 !
FILTER | OPERATION | INPUT SELECTOR |
| LINE IN | LINE OUT |
| OPERATION | FILTER | ||
|
| (Lch) |
| |||||||
OFF | STEREO MONO(Lch) | A | B | A | A | B | A + B |
| STEREO MONO | OFF |
HPF LPF |
|
|
|
|
|
|
|
|
| HPF LPF |
|
| 1.0 |
|
|
|
|
|
| 1.0 |
|
|
| 0.5 |
| MONO L |
|
|
| L | 0.5 |
|
|
| GND |
|
|
|
|
|
|
|
|
|
| 0.3 |
|
|
|
|
|
| 0.3 |
|
| MIN | MAX |
|
|
|
|
|
| MIN MAX | 4 CHANNEL |
| INPUT |
|
|
|
|
|
| INPUT | ||
| SENSITIVITY(V) |
| R |
|
|
| R | SENSITIVITY(V) | POWER AMPLIFIER | |
| CONTROL A |
|
|
|
|
|
|
| CONTROL | B |
mA |
|
| @ |
|
|
|
|
| mA | |
#
$
%
1Fuse (25 A ⋅ 1)
2Battery terminal
3Ground terminal
4Power control (REMOTE) terminal
5Amplifier A speaker output terminals
When multiple speakers are to be connected, ensure that the combined impedance is 4Ω or greater.
2CAUTION
The rated input of the speakers should be no less than the maximum output of the amplifier. Otherwise malfunction may result.
6Amplifier B speaker output terminals
❖SPEAKER OUTPUT terminals
•Stereo Connections:
When you wish to use the unit as a stereo amplifier, stereo connections are used.
The speakers to be connected should have an impedance of 2Ω or greater. When
multiple speakers are to be connected, ensure that the combined impedance is 2Ω or greater for each channel.
•Bridged Connections:
When you wish to use the unit as a high- output monaural amplifier, bridged connections are used. (Make connections to the LEFT channel (+) and the RIGHT channel
The speakers to be connected should have an impedance of 4Ω or greater.
7Speaker level input terminals
8INPUT SELECTOR switch
This switch selects the input method of the signals to be amplified by amplifiers A and
B.
A B A
INPUT SELECTOR
•A B position:
Amplifies both of the signals input to amplifiers A and B.
•A position:
Amplifies only signal input amplifier A with both amplifiers A and B.
9Amplifier A LINE IN terminal
0Amplifier B LINE IN terminal
4