Installation procedure

•Connect the speaker cables to appropriate speaker connectors separately. Sharing the negative cable of the speaker or grounding speaker cables to the metal body of the car can cause this unit to fail.

•After installation, check that the brake lamps, winkers, and wipers work properly.

Installation

Self-tapping screw

Air inlet

Cooling fan

Air inlet

Installation board, etc. (thickness : 15 mm or more)

•Since the power amplifier has no parts which require operation, it can be installed at a position away from the driver’s seat without any hindrances.

As generally accepted positions for its installation, places such as inside the trunk, etc. can be considered.

•Use the extension cables. (Optional.)

Type

Length

0.5m

1m

2m

 

4m

 

5m

 

6m

 

RCA cable

CA-2SL

CA-12SL

CA-22SL

 

 

 

CA-52SL

 

 

 

 

 

 

 

 

 

 

RCA cable (ø7mm)

CA-3WL

CA-13WL

CA-23WL

 

 

 

CA-53WL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RCA cable (ø12mm)

CA-5W

CA-15W

CA-25W

CA-45W

 

 

 

CA-65W

 

 

 

2CAUTION

•Do not install the unit under the carpet. Otherwise heat build-up occurs and the unit may be damaged.

•Install this unit in a location which allows heat to easily dissipate. Once installed, do not place any object on top of the unit.

•The surface temperature of the amplifier will become hot during use. Install the amplifier in a place where people, resins, and other substances that are sensitive to heat will not come into contact with it.

•This unit has cooling fans to decrease the internal temperature. Be careful not to block the cooling fan openings when installing the unit. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction.

•When making a hole under a seat, inside the trunk, or somewhere else in the vehicle, check that there is nothing hazardous on the opposite side such as a gasoline tank, brake pipe, or wiring harness, and be careful not to cause scratches or other damage.

•Do not install near the dashboard, rear tray, or air bag safety parts.

•The installation to the vehicle should securely fasten the unit to a place in which it will not obstruct driving. If the unit comes off due to a shock and hits a person or safety part, it may cause injury or an accident.

•After installing the unit, check to make sure that electrical equipment such as the brake lamps, turn signal lamps and windshield wipers operate normally.

English 3