Connection
Installation
7Installing the switching unit with a board in the trunk space
1 Install the switching unit with | |
(φ 4 ⋅ 16 mm) | |
| screws $ (φ 4 ⋅ 16 mm). |
Switching unit !
Board etc.
thickness: 17mm or more
7Installing the switching unit on the carpet under a seat
Switching unit ! | 1 Remove the backing from the velcro strips # |
| and attach it to the bottom of the switching |
| unit !. Install the switching unit on the |
| carpet. |
carpet | Velcro strips # |
•Velcro strips are used to install the switching unit in a simple manner. To install the switching unit securely, use of self- tapping screws is recommended.
•Install the switching unit ! in places that do not obstruct driving.
•Install the switching unit ! in places where it is not touched by the tip of the shoes of a rear seat passenger. Route cables so that they are not caught in slide rails.
•Do not install the unit in places where it is exposed to direct sunlight, high heat, or where water may splash over it.
•Do not place anything on top of the switching unit !.
4