Safety Precautions | Accessories | |
|
|
|
2WARNING
•Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals.
•If you experience problems during installation, consult your Kenwood dealer.
•Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
•Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.
•If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die.
•After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.
•Just after using the unit, XM Mini tuner (Optional accessory) may be extremely hot. When you remove the tuner, wait for a while until it gets cooler and then remove it.
1
2
3
4
..........1
..........2
..........4
..........1
2