Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type.

1Enter Standby

Press the [SRC] button. Select the "STBY" display.

2Enter Speaker Setting mode Press the [VOL] knob.3Select the Speaker type Turn the [VOL] knob.

Each time you turn the knob, the setting alternates between the settings shown in the table below.

Speaker type

Display

OFF

 

"SP-F"

For 5

& 4 in. speaker

"SP-5"

For 6

& 6x9 in. speaker

"SP-6"

For the OEM speaker

"SP-O"

4Exit Speaker Setting mode Press the [VOL] knob.

Clock Display

Press the Control knob for at least 1 second.

Each time you press the button, the clock display turns ON and OFF.

Subwoofer Output

Turning the Subwoofer output ON or OFF.

Push the Control knob toward [AM] for at least 2 seconds.

Each time you push the knob, Subwoofer output switches ON and OFF.

When it is ON, "On SUB" is displayed.

Theft Deterrent Faceplate

The faceplate of the unit can be detached and taken with you, helping to deter theft.

Removing the FaceplatePress the Release button.

The faceplate unlocks, allowing you to detach it.

¤

•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.

•Keep the faceplate in its faceplate case while detached.

•Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

Reattaching the Faceplate1Align the projections on the unit with the grooves on the faceplate.

Projections

Grooves

2Push the faceplate in until it clicks.

The faceplate is locked in place, allowing you to use the unit.

TEL Mute

The audio system automatically mutes when a call comes in.

When a call comes in

"CALL" is displayed.

The audio system pauses.

Listening to the audio during a call

Press the [SRC] button.

The "CALL" display disappears and the audio system comes back ON.

When the call endsHang up the phone.

The "CALL" display disappears and the audio system comes back ON.

⁄

•To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 15).

English 7