Installing the unit
1 | Connect the wiring harness |
| to the unit. Other wiring |
| connection has been completed |
| earlier. (page 13) |
2 Before attaching, make |
|
sure the direction of the |
|
escutcheon is correct. | Dashboard of your car |
(Wider hooks on the | |
top side.) |
|
| Bend the appropriate tabs |
| to hold the mounting |
| sleeve firmly in place. |
Installing without using the mounting sleeve (Japanese car)
1Remove the mounting sleeve and escutcheon from the unit.
2Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with the supplied screws.
T:Toyota cars ; N: Nissan cars
Removing the unit
1Detach the faceplate.
2 Engage the catch pin on the removal tools into the holes on both sides of the escutcheon, then pull it out.
3 Insert the removal tools deeply into the slots on each side, then follow the arrows instructions as shown on the right.
14