9
ENGLISH |
Default:
XX
SEEK MODE Selects the tuning method for the
4
/
¢
buttons.
CHANNEL: Manually search for a channel. ; PRESET: Search for a preset channel of
the selected band.
CHANNEL LOCK/ CH LOCK To unlock settings:
1
Turn the volume knob to select a number.
2
Press
4
/
¢
to move to the entry position.
3
Repeat steps
1
and
2
to enter the current pass code.
(Initial pass code is 0000.)
4
Press the volume knob to confirm.
CODE SET
1
Turn the volume knob to select a number.
2
Press
4
/
¢
to move to the entry position.
3
Repeat steps
1
and
2
to enter a new 4-digit pass code.
4
Press the volume knob to confirm.
5
Repeat steps
1
to
4
to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings from next time.
CHANNEL EDIT/CH EDIT * 1 T
urn the volume knob to select a category, then press the knob.
2 T
urn the volume knob to select a channel you want to lock, then press the
knob. “L” appears in front of the channel number.
3
Press
G
to exit.
CHANNEL CLEAR/CH CLEAR *
YES: Clears all the locked channels. ;
NO: Cancels.
MATURE CH ON: Turns on the Sirius XM-defined lock setting (mature channel).
; OFF: Turns off.
• If [ON] is selected, your setting (
CHANNEL EDIT/
CH EDIT) is temporary ignored.
SIGNAL LEVEL/ SIGNAL LVL
NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current received signal.
BUFFER USAGE/ BUF USAGE 0% — 100% (0): Shows the memory usage for Replay buffer.
* Displayed only when
[MATURE CH]
is set to
[OFF]
.
If a locked channel or a mature channel (
[MATURE CH]
is set to
[ON]
)
is selected, a pass code input screen appears. Enter the pass code to
receive the channel.
• To store a channel of the current band: Press and hold one of
the number buttons (1 to 6).
• To select a stored channel of the current band: Press one of the
number buttons (1 to 6)
Direct Access Tuning (using RC-406) (except for
KMR-355U
)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a channel number, then press
4
/
¢ (+) to start searching.
• To cancel, press or DIRECT.
Replay
Press G.
Replay starts from the live position (and “ ” lights up for
KDC-X397
).
During Replay...
• To pause or resume playback, press 6 38.
• To skip the current song backward/forward, press 4
/
¢.
• To rewind/fast-forward, press and hold 4
/
¢.
• To exit from Replay and go to live, press G.
Other settings
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select
[SETTINGS]
, then press the knob.
3
Turn the volume knob to make a selection (see table on the right),
then press the knob.
4 Press and hold to exit.
SiriusXM™
EN_KDC-X397[KWK0]f.indd 9EN_KDC-X397[KWK0]f.indd 9 8/22/12 10:06:05 AM8/22/12 10:06:05 AM