Kenwood KDC-3020R Tuner features

Tuner features

— 9—

AM FM

SRC

¢4

#1 - 6

ST indicator

Band display Preset station number

Frequency display

AUTO indicator

Putting the station in the memory.

1Select the band

Press the [FM] or [AM] button.

2Select the frequency to put in the memory

Press the [4] or [¢] button.

3Put the frequency in the memory

Press the [#1] — [#6] button for at least 2 seconds.

The preset number display blinks 1 time.

On each band, 1 station can be put in the memory on each [#1]

— [#6] button.

Station Preset Memory

Selecting the station.

1Select tuner source

Press the [SRC] button.

Select the "TUNER" display.

2Select the band

Press the [FM] or [AM] button.

Each time the [FM] button is pressed it switches between the

FM1, FM2, and FM3 bands.

3Tune up or down band

Press the [4] or [¢] button.

During reception of stereo stations the "ST" indicator is ON.

Tuning

KDC-3020R_U.S 01.11.29 10:47 AM Page 9

Contents

Main Contents Safety precautions To prevent injury or fire, take the following precautions: 2WARNING To prevent damage to the machine, take the following precautions: 2CAUTION IMPORTANT INFORMATION CLASS 1 LASER PRODUCT Cleaning the CD Slot Lens Fogging About CDsAbout RDS RDS (Radio Data System) Enhanced Other Network Alarm Handling CDs General features 1 TEL Mute 2 3 4 1 2 System Q 1 Speaker Setting Theft Deterrent Faceplate Switching Display 2 1 2 3 4 Tuner features Tuning Station Preset Memory 1 2 RDS features Auto Memory Entry Preset Tuning 1 2 3 PTY (Program Type) 4 2 Program Type preset RDS features Traffic Information 1 2 3 CD/External disc control features Playing CD Playing External Disc Magazine Random Play (Function of disc changer) Random Play CD/External disc control features Fast Forwarding and Reversing Page 1 Menu System Touch Sensor Tone 2 Menu system Synchronize Clock 1 DSI (Disabled System Indicator) 2 3 4 Menu system Restricting RDS Region (Region Restrict Function) Auto TP Seek Monaural Reception <In FM reception> Text Scroll <In External disc control mode> Disc Naming <In External disc control mode> Accessories Installation Procedure 14 6 3 .........4 5 .........2 2 Connecting Wires to Terminals Connector Function Guide Connecting Wires to Terminals KDC-3020R_U.S 01.11.29 10:47 AM Page 22 Installation Connecting the ISO Connector (see p.21) Removing the hard rubber frame 2 1 Installing in Japanese-Made Cars 2 Screwing the Faceplate on the Unit Page ? Tuner source ? Disc source ? If the following situations, consult your nearest service center: The messages shown below display your systems condition. Specifications Specifications subject to change without notice. FM tuner section MW tuner section LW tuner section