English
— 34—

MP3 source

?Cannot play an MP3.67
✔Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
☞Use a medium conforming to ISO 9660 Level 1/2, Joliet, and
Romeo.
✔The MP3 has no or invalid track name extension.68
☞Add the ".MP3" extension to the MP3 track name.
✔The media is scratched or dirty.69
☞Clean the media, referring to the section on <CD cleaning> (page
8).
?Noise or no sound generated when an MP3 is played.70
✔The track has the MP3 track name extension while it is not an MP3.
☞Do not use the ".MP3" extension in non-MP3.
?Takes time before the unit starts playing MP3.71
✔The medium contains many albums, tracks, and hierarchical levels.
☞The unit checks all tracks on the loaded medium first. If the
medium has many tracks recorded, it may take a long time for the
unit before it starts playing MP3.
?Fails to play MP3 in the intended order.72
✔The MP3 tracks were not written by the CD writer in the order in
which you wanted them to be played.
☞Depending on the CD writer, you may be able to set the order in
which MP3 tracks are to be played by writing them onto a
medium with their track names beginning with play sequence
numbers such as "01" to "99".
?The sound skips when an MP3 is being played.73-1
✔The media is scratched or dirty.
☞Clean the media, referring to the section on <CD cleaning> (page
8).
✔The recording condition is bad.73-2
☞Record the media again or use another media.
?Can't display the ID3 tag information correctly.75
✔Record is not made in conformity with the ID 3 tag version1.x.
☞Record in conformity with the ID 3 tag version1.x.
?Can’t enter Album Select mode.76
✔There’s no folder recorded in the MP3 media.
☞Use a media with levels.
?The songs in the selected folder aren’t played in Album Select
mode.77
✔There are no MP3 in the selected folder.
☞Make sure there’s recorded content in the MP3 media.
?The MP3 track/album search takes time.78
✔Many tracks are recorded on the media.
☞When the media directory is complex, the track/album search can
take time.
?The MP3 related text isn’t displayed correctly.79
✔A character is entered that this unit can't display.
☞For the characters that can be used for MP3 text entry, refer to
<Notes on playing MP3> (page 6).
?The MP3 track time isn’t displayed correctly.80
☞There are times when it isn’t displayed correctly according to the
MP3 recording conditions.

If the following situations, consult your nearest service

center:

•Even though the disc changer is connected, the Disc Changer source is
not ON, with "AUX" showing in the display during the Changer Mode.
•Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87,
KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the
Auxiliary input is entered when switching modes.
Troubleshooting Guide
KDC-MPV7019(K)_U.S r2 01.11.22 11:57 AM Page 34