4 | Quick Start Guide
Preparations

Exiting the Demonstration mode

Turn off the Demonstration mode when
you use the unit for the first time after
installation.
1 Press the Control knob to quit the
Demonstration mode when the message
“To cancel DEMO Press the volume knob”
is displayed (approx. 15 seconds).
2 Turn the Control knob and press it
when “YES” is displayed.
The Demonstration mode can also be
canceled in the Function Setting mode.
Refer to <Demonstration mode setting>
(page 32) in Instruction manual

Adjusting the clock

1 Press the [DISP] button several times to
display the clock.
2 Press and hold [DISP] button.
3 Turn the Control knob to adjust the
hour, and then press the Control knob.
4 Turn the Control knob to adjust the
minute, and then press the Control
knob.

Control knob (Volume knob)Release

[DISP]

Detaching/ Reattaching the

faceplate

Press the Release
button.
¤
• Remove the faceplate at once after
pressing the Release button; otherwise it
can fall down due to vibration.
• The faceplate is a precision component of
the unit and can be damaged by shocks
or jolts.
• Keep the faceplate in its case while
detached.
• Do not place the faceplate (and case) in
areas exposed to direct sunlight, excessive
heat or humidity. Also avoid places with
too much dust or the possibility of water
splashing.
B59-2154-00_00_KDC400U_QSG.indb 4 12/05/15 9:38