Kenwood KDC-215S, KDC-315S, KDC-315V, KDC-35MR, KDC-4015, KDC-415S ■Removing the Unit, ■Removing the hard rubber frame

English

Installation

■Removing the hard rubber frame

1Engage the catch pins on the removal tool and remove the two locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

Catch

Lock

■Removing the Unit

1Refer to the section “Removing the hard rubber frame (P. 22)” and then remove the hard rubber frame.

2Remove the Hex-head screw with integral washer (M4⋅8) on the back panel.

3Insert the two removal tools deeply into the slots on each side, as shown.

Accessory3

Removal tool

2When the lower level is removed, remove the upper two locations.

Accessory4

4Lower the removal tool toward the bottom, and pull out the unit halfway whilst pressing towards the inside.

Catch facing up

Accessory3 Removal tool

NOTE

The frame can be removed from the top side in the same manner.

2CAUTION

Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, being

careful not to drop it.

— 22 —

Contents

For your records English Before use General features Basic Operations of remote Tuner features Location : Bottom Panel FCC WARNING •Reorient or relocate the receiving antenna •Increase the separation between the equipment and receiver •Consult the dealer or an experienced radio/TV technician for help 2WARNING To prevent injury or fire, take the following precautions: •Make sure not to get your fingers caught between the faceplate and the unit •Be careful not to drop the unit or subject it to strong shock The unit may break or crack because it contains glass parts Reset button Handling CDs •Do not stick tape on either side of the CD Storing CDs Cleaning CDs Checking New CDs for Burrs Power Turning on the power: Turning off the power: Volume Increasing Volume: Switching Modes Switching Modes: Selecting standby mode: Loudness Turning Loudness On/Off: "TRE": Adjust the treble level "BL": Adjust the balance level "FD": Adjust the fader level ec4/dB (Sound Coordinate) Mobile Preset Theft Deterrent Faceplate Removing the Faceplate: Press the release button Reattaching the Faceplate: Clock display Turning clock display On/Off: Tuning Station Preset Memory Recalling a Preset Station: Clean Reception System Circuit (CRSC) Turning CRSC On/Off: Auto Memory Entry Playing CDs Playing CDs: Stopping and Ejecting CDs: Playing Other Disc mode Playing Discs: Track Search Making a Reverse Track Search: Making a Forward Track Search: Making a Forward Disc Search: Track / Disc Repeat Turning Repeat Play On/Off: Track Scan Starting the Track Scan : Random Play Magazine Random Play ATT SRC TUNE –/4/TRACK – TUNE +/¢/TRACK + Loading and Replacing the Batteries: Basic operations Tuner features CD/External disc control features Accessories External view Number of items Installation Procedure Connecting Wires to Terminals If no connections are made, do not let the wire come out from the tab Installation ■Installation ■Installing in Japanese-MadeCars ■Removing the hard rubber frame ■Removing the Unit ■Screwing the Faceplate on the Unit Troubleshooting Guide PROBLEM POSSIBLE CAUSE SOLUTION External disc control mode (KDC-4015/KDC-415S/KDC-315S/KDC-35MRonly) If the following situations, consult your nearest service center: Even though no device Page Specifications Specifications subject to change without notice. FM tuner section AM tuner section CD player section Audio section

Kenwood ■Removing the Unit, ■Removing the hard rubber frame

Models: KDC-215S KDC-315S KDC-315V KDC-35MR KDC-4015 KDC-415S