For the operation method refer to <Auto Memory Entry> (page
10).
Auto Memory Entry <In Tuner mode>
Sets the tuning mode.
Tuning mode Display Operation
Auto seek "AUTO 1" Automatic search for a station.
Preset station seek "AUTO 2" Search in order of the stations
in the Preset memory.
Manual "MANUAL" Normal manual tuning control.
Tuning Mode <In Tuner mode>
Only stations whose reception is good are searched for in auto
seek tuning.
Display Setting
"LO.S OFF" The local seek function is OFF.
"LO.S ON" The local seek function is ON.
Local Seek <In Tuner mode>
It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00M"
"NEWS 90M"
When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin
Interrupt function is ON.
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.
•If you choose the "20M" setting, further news bulletins will not be
received for 20 minutes once the first news bulletin is received.
•The news bulletin volume is the same level that was set for traffic
information (page 12).
•This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
•When the News Bulletin Interrupt function is ON, it switches to an
FM station.
…
News Bulletin with Timeout Setting
— 19 —
KDC-4024/4024V_U.S 02.9.27 12:56 PM Page 19