Mobile Preset
This function allows you to adjust the setting that is recalled with the System Q, according to types of speakers.
1Press the SRC button repeatedly to select the standby mode. "ALL OFF/OFF" is displayed when the standby mode is selected.
2Press the Q button to enter the mobile preset plan mode.
3Press either the 4 or ¢ button to select the type of speaker. The setting switches as follows.
Off ("SP OFF/
/For 6/6x9 in. speaker ("SP 6/6x9/
4Press the Q button to end the mobile preset plan mode.
NOTE
When you change the setting of type of speaker, the bass, middle, and treble tone settings are returned to original levels.
Function of the
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you, helping to deter theft.
Projections
Release button
Grooves
Removing the Faceplate: Press the release button.
The faceplate is unlocked, allowing you to detach it.
NOTE
•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached.
•Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Reattaching the Faceplate:
1Align the projections on the unit with the grooves on the faceplate.
2Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
Operation of the
Adjusting Time
Adjust the time.
1When the clock is not displayed, first press the CLK button to display the clock.
2Press the ADJ button for at least two seconds to enter the clock adjustment mode. The clock display will blink.
3• Adjusting the hours
Press the FM button to advance the hours, or press the AM button to make the hours go back.
•Adjusting the minutes
Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back.
4Press the CLK button to end the clock adjustment mode.
NOTE
For time adjustment with the
— 11 —