Switching Modes

Switching Modes:

Each time you press the SRC (source) button, the mode switches as follows:

▼

Tuner mode

▼

CD mode

▼

External disc control mode 1(KDC-416S/316S/37MR/316V only)

▼

External disc control mode 2 / AUX mode (KDC-416S/316S/37MR /316V only)

▼

Standby mode

Selecting standby mode:

Press the SRC button repeatedly and switch to "ALL OFF/OFF". When "ALL OFF/OFF" is displayed, the standby mode is activated.

The standby mode turns all functions off while leaving the power to the unit on. Use this mode when you want to have the display illuminated but don't want to listen to anything.

NOTE

•The mode switches to the next mode from any mode which cannot be used.

•The external disc control mode will differ depending on the unit that is connected.

•To enable the selection of External disc control mode 2/AUX mode, you should connect optional switching adapter KCA- S210A (which allows you to select both External disc control mode 2 and AUX mode) or CD changer (KDC-CPS87, KDC- CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) or switching adapter CA-C1AX (which allows you to select AUX mode only).

During the AUX mode, "AUX/AVin" will show in the display. When the CA-C1AX is being used, the AUX Mode will replace the External Disc Control Mode.

Loudness

This function amplifies low and high tones when the volume is turned down.

The LOUD indicator lights up when the loudness function is on.

Turning Loudness On/Off:

Press the LOUD button for at least one second to switch the loudness on and off.

Function of the KDC-316S/KDC-37MR/KDC-316V/KDC-216S/KDC-116S

Clock display

Changing the Clock Display:

Press the CLK button to switch the clock display on and off.

NOTE

The clock indicator lights while the clock is displayed.

— 9 —