English
Connecting Wires to Terminals
Front right output (Red)
Front left output (White) | FRONT |
| Rear left output (White) |
| Rear right output (Red) |
Fuse (10A) |
|
If no connections are made, do not let the | FM/AM antenna input |
wire come out from the tab. |
|
|
| Wiring harness | |
|
| (Accessory1) | |
Connect either to the power control |
|
| |
terminal when using the optional | P.CONT | Power control/ | |
power amplifier, or to the antenna |
| ||
| Motor antenna control wire | ||
control terminal in the vehicle. | ANT | ||
(Blue/White) | |||
| CONT |
KENWOOD disc changer control input
NOTE
To connect the Disc changer, consult your Disc changer manual.
| – | White/Black | To front left |
FRONT • L | + | White | speaker |
|
Ignition key switch
Car fuse box (Main fuse)
+ | – |
Battery
ACC | Ignition wire (Red) |
| Battery wire (Yellow) |
Car fuse box |
|
Ground wire (Black) · (To car chassis)
| – | Gray/Black | To front right | |
FRONT • R | + | Gray | speaker | |
| – | Green/Black | To rear left | |
|
| |||
|
|
| ||
REAR • L | + Green | speaker | ||
| – | Purple/Black | To rear right | |
|
| |||
REAR • R | + |
| ||
Purple | speaker | |||
| ||||
2WARNING | 2CAUTION |
If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the - connector to a rear output terminal.
— 26 —