![](/images/backgrounds/21151/21151-3331x1.png)
Troubleshooting Guide
PROBLEM | POSSIBLE CAUSE | SOLUTION |
Can’t remove disc.
The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF.
The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button.
Free switching of the sound quality.
The System Q function is set on Scan mode.
Refer to the “System Q” page and switch it to a function other than Scan mode. (see p. 10)
CD/External disc control mode
The disc control mode cannot |
| No wire has been connected to the disc changer input | Connect the wire to the disc changer input terminal on |
be selected. |
| terminal on the unit. | the unit. |
|
|
|
|
The specified disc does not |
| The specified CD is quite dirty. | Clean the CD. |
play, but another one plays |
|
|
|
| The CD is | Load the CD with the labeled side up. | |
instead. |
| ||
|
|
|
|
|
| The disc is loaded in a different slot from that specified. | Eject the disc magazine and check the number for the |
|
|
| specified disc. |
|
|
|
|
|
| The disc is severely scratched. | Try another disc instead. |
|
|
|
|
The sound skips. |
| Something is touching the disc changer. | Remove whatever is touching it. |
|
|
|
|
|
| The CD is scratched or dirty. | If skipping happens at the same place when the car is |
|
|
| stopped, something with the CD is wrong. Clean the CD. |
|
|
|
|
The display shows that the |
| The computer chip in the unit is not functioning normally. | Press the reset button on the unit (see p. 5). |
changer is being played, but no |
|
|
|
sound can be heard. |
|
|
|
|
|
|
|
The specified track will not |
| Random play or magazine random play has been | Turn off random play or magazine random play. |
play. |
| selected. |
|
|
|
|
|
Track repeat, disc repeat, track |
| The setting is not canceled. | The settings for these functions remain on until the |
scan, random play, and |
|
| setting to off or the disc ejected, even if the power is |
magazine random play start by |
|
| turned off or the source changed. |
themselves. |
|
|
|
|
|
|
|
Cannot play |
| Finalization processing is not being conducted for CD- | Conduct finalization processing with CD recorder. |
|
|
| |
|
|
|
|
|
| A | Use a CD changer compatible with |
|
|
|
— 31 —