Kenwood KDC-5019, KDC-519 1, 2, 3, 4, 1 2, 1, 2, 3, 4, 5, 6

1Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
2Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1 second.
The clock display blinks.
3Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4Exit Clock adjustment mode
Press the [MENU] button.
Manual Clock Adjustment
Setting the operation check sound (beep sound) ON/OFF.
Display Setting
"Beep ON" Beep is heard.
"Beep OFF" Beep canceled.
Touch Sensor Tone
1Turn the power ON.
2Do the step 4 and 5 operation, and enter the Security Code.
"APPROVED" is displayed.
The unit can be used.
When the Security Code function is activated, the code can't be
changed and the function can't be released.
Note, the Security Code can be set as the 4 digit number of your
choice.
1Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
3Enter Security Code mode
Press the [4] or [¢] button for at least 1 second.
When "ENTER" is displayed, "CODE" is displayed.
4Enter the Security Code
Press the [#1] — [#4] button.
Example: If the Security Code is "3510".
Step Button #Times pressed Display
1[#1] 4 "3"
2[#2] 6 "5"
3[#3] 2 "1"
4[#4] 1 "0"
5Confirm the Security Code
Press the [DISP] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is displayed.
6Do the step 4 and 5 step operation, and reenter the security
code.
"APPROVED" is displayed.
The Security Code function activates.
When a Code different from step 4 is entered, repeat from step 4.
Press the Reset button and when it's removed from the
battery power source
— 19 —
KDC-519_U.S (K) r4 01.10.19 0:14 PM Page 19