news bulletin volume is the same level that was set for Traffic Information.
• Forced MONO
Strong electrical fields (such as from power lines) may cause unstable sound quality when it is set to ON. In such a situation, turn it OFF.
Station Preset Memory
Putting a station in the memory.
1Select the radio band and tune in a desired radio station you wish to store in the preset memory
2Enter Menu List mode Press the [MENU] button.
3Enter Preset Memory mode
Turn the [VOL] knob and press it when the desired item is displayed.
Select “List & Memory”.
4Select the number to put in the memory Turn the [VOL] knob and press it for at least 2 seconds when the desired item is displayed. Select preset number.
Display | Overview | |
“List & Memory” |
| |
| Preset number 1. | |
| Preset number 2. | |
| … |
|
| Preset number 6. | |
Cancelling the Preset Memory mode
Press the [MENU] button for at least 1 second, and then press it again briefly.
Auto Memory Entry
Putting stations with good reception in the memory automatically.
1 Select the radio band you wish to store in the preset memory
2 Enter Menu List mode Press the [MENU] button.
3 Enter Auto Memory Entry mode
Turn the [VOL] knob and press it when the desired item is displayed.
Select “Settings” > “Auto Memory”.
4 Open Auto Memory Entry
Turn the [VOL] knob and press it when the
desired item is displayed. Select “YES”.
When 6 stations that can be received are put in the memory, auto memory entry closes.
Preset Tuning
Recalling the stations in the memory.
1Select the radio band
2Enter Menu List mode Press the [MENU] button.
3Select a desired station in the memory Turn the [VOL] knob and press it when the
desired item is displayed.
Select “List & Memory” > Preset number.
Function of remote control
Direct Access Tuning
Tuning in a desired radio station by entering the frequency.
1Select the radio band
2Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote control.
“– – –
3Enter the frequency
Press the number buttons on the remote control.
Example:
Desired frequency | Press button |
92.1 MHz (FM) | [9], [2], [1] |
810 kHz (AM) | [8], [1], [0] |
4Tune in to the entered frequency Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote control.
⁄
•You can enter the FM band frequency in steps of a minimum of 0.1 MHz.
English 21