Disc control features (See page 7)

Playing CDs

Playing CDs:

A press of the release button causes the faceplate to drop to the front, thereby exposing the CD slot.

Holding the CD with the labeled side facing up, insert it in the slot. The CD will start playing. Push back on the right side of the faceplate with your hand until it locks.

The ¢ indicator will light when a CD has been inserted.

2CAUTION

When inserting a CD, make sure the CD has been completely drawn in before pushing back the faceplate. Failing to do so might scratch the CD.

Playing CDs Already Inserted:

Press the SRC button repeatedly until the CD mode is obtained.

"CD" is displayed when the CD mode has been selected. The CD will start playing.

Pausing and Restarting CD Play:

Press the 38 button to make the disc pause.

Press the same button again to start play again.

Eject:

0

Press the release button and drop

open the faceplate.

 

Press the 0 button located near

 

the CD slot.

 

The CD stops playing and ejects

 

from the slot.

 

Push back on the right side of the

 

faceplate with your hand until it

 

locks.

 

2CAUTION

•Do not attempt to insert a CD into the slot if another one is already there.

•The unit can only play 12-cm (5-inch) CDs. If you insert an 8-cm (3-inch) CD, it will get stuck inside and can cause the unit to malfunction.

•When the faceplate has been dropped open, it might interfere with the shift lever or something else. If this happens, pay

attention to safety and move the shift lever or take an appropriate action, then operate the unit.

•Do not apply excessive force to the open faceplate or place objects on it. Doing so will cause damage or breakdown.

•Do not use the unit with the faceplate in the open condition. Doing so will cause breakdown.

NOTE

When you load a CD and eject it right away, the next time you try to insert the CD may not load. In such a situation, take the CD out for a moment and then reinsert it.

— 21 —