ASSEMBLY INSTRUCTIONS

Inspect contents of the box to ensure all parts are included and undamaged.

1

2

6

3

5

4

A flathead screwdriver is required for mounting the wall bracket.

PARTS LIST:

1Classic Tier Light Head Fixture

2Connector

3Ground Stake

4Ground Connector w/Point

5Deck/Wall/Fence Mounting Bracket

6Mounting Screws (2)

Select a location with full, direct sunlight. Shady locations will not allow the battery to charge fully and will reduce the hours of nighttime light.

NOTE: The rechargeable Ni-Cd battery must be allowed to fully charge to operate properly. Partially charging the battery on a consistent basis will drastically reduce the life of the battery.

The selected location should not be near a nighttime light source such as a porch light or street light, as these might keep the solar lights from automatically turning on. The solar lights should not be placed closer than 5 feet from one another. This could cause the solar lights to flicker from the adjacent light source.

2

Page 3
Image 3
Brinkmann 822-0408-4, 822-0408-0 owner manual Assembly Instructions