OPERATING INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SOLAR LIGHT.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Step 1

Attach the ground stake to a pointed connector. Push approximately 3" of the ground stake into the ground. If the ground is too hard, soak area with water to soften.

Step 2

Align the connector to the grooves on bottom of light head. Turn counter-clockwise to set in place.

Step 3

Insert light head into ground stake. The photocell light sensor should point away from other nighttime light sources.

Step 4

Charge in direct sunlight for 10-12 FULL, SUNNY DAYS. The light will turn on automatically at night. Allow at least

10-12 cycles (i.e., 10-12 days and nights of charging and discharging) for the battery to charge to its full capacity.

3

Page 4
Image 4
Brinkmann 822-0408-0, 822-0408-4 owner manual Operating Instructions