Brinkmann 822-0408-0, 822-0408-4 owner manual Changing Battery, Cleaning, Step

Changing Battery

Step 1

Remove lens from top housing by turning lens counter-clockwise.

Step 2

With top housing upside down (solar panel facing down), unlock housing plate by turning counter-clockwise.

Step 3

Remove battery. Replace with new Ni-Cd rechargeable battery.

Step 4

Lock housing plate by turning clockwise.

Step 5

Attach the lens by aligning the slots with the grooves in top housing. Turn clockwise to lock in place.

NOTE: These lights utilize L.E.D. (Light Emitting Diode) technology. There are no bulbs to replace.

Cleaning

It is important that the solar panel is kept free of dirt and debris. A dirty solar panel will not allow the battery to fully charge. This will shorten the life of the battery and cause the light to malfunction. Clean regularly with a dampened cloth or paper towel.

5

IMPORTANT: The EPA Certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery contained in our product indicates The Brinkmann Corporation is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the

United States or Canada. The RBRC® program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. The Brinkmann Corporation’s involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.

Lens

Housing Plate

Battery

Top Housing