2.Plug the battery pack’s connector into the socket in the compartment (the connector fits only one way), then place the battery pack in the compartment.
MODELS VARY! CHARGE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL appears.
3.Replace the cover.
To charge the battery pack, place the handset on the charger. The CHARGE indicator on the charging cradle lights. Proceed to “Registering the Handset” on Page 8.
Important: Be sure the battery pack is properly connected before you try to charge it. The CHARGE indicator lights when the handset is on the charger, even if the battery pack is not connected.
Recharge the battery pack when LOW BATTERY appears.
• Using a damp cloth, clean the charging contacts on the handset about once a month.
•If the battery pack becomes weak during a call, the handset beeps and LOW BATTERY appears. When this happens, you cannot make a call until you recharge the battery pack.
•If the display is blank and the phone does not work, recharge the battery pack. (The battery power might be too low to light the display.)
About once a month, fully discharge the battery by keeping the handset off the base or charger until LOW BATTERY stays lit. Otherwise, the battery pack loses its ability to fully recharge.
6
