Radio Shack 43-5529 owner manual Using AC Power, Connecting/Charging the Battery

Using AC Power

You can power the charger using the supplied 9V, 210 mA AC adapter.

Caution: You must use a Class 2 power

source that supplies 9V DC and delivers at

least 210 mA. Its center tip must be set to positive and its plug must fit the charger’s DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the handset or the adapter.

Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the bottom of the charger. Route the cord through the strain relief slot and plug the adapter into a standard AC outlet.

Connecting/Charging the Battery

The phone comes with a rechargeable nickel metal hydride (Ni-MH) battery pack. Before using your phone, you must install the battery pack,

and then charge it for about 15-20 hours.

1. Press down and slide the battery compartment cover off.

5