![](/images/new-backgrounds/1184352/184352433x1.webp)
3.31 SETUP | 3 Tests and Diagnostics |
Critical Battery
Configures what action is taken when the remaining battery power is close to running out while the system is in Sleep Mode.
This setting is only available when the Critical battery action in Windows is set to Hibernate (Default).
To access it, Start
Power Options
The operation of this function is dependent upon battery status.
Enabled | When the remaining battery power is about to run out while |
| the system is in Sleep Mode, the system is automatically |
| woken up and then switched to Hibernation Mode |
| (Default). |
Disabled | No action is taken even if the remaining battery power is |
| about to run out while the system is in Sleep Mode. |
(g)Beep Volume
This Option sets up the volume of a Beep sound. Medium→High→OFF→Low
(h)Diagnostic Mode
This option enables/disables the HW Diagnostic test function.
Enabled | Disables the HW Diagnostic test function. (Default) |
Disabled | Enables the HW Diagnostic test function. |
(i) USB Sleep and charge
This Option sets up whether a power supply is supplied to a USB device, when PC is in a Sleep mode state.
DisabledA power supply is not supplied in a Sleep mode state. (Default)
Enabled(Mode1) A power supply is supplied in a Sleep mode state.
Enabled(Mode2) A power supply is supplied in a Sleep mode state.
Enabled(Mode3) A power supply is supplied in a Sleep mode state.
Enabled(Mode4) A power supply is supplied in a Sleep mode state.
TECRA M10 Maintenance Manual | [CONFIDENTIAL] |