Toshiba TECRA, M10 manual Receive

3 Tests and Diagnostics3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program

Subtest01	(i82562 + ICHx)
	This subtest checks the operation of mini-PCI I/F by the loopback test in the
	chip.
	The following message will appear:
	[LAN transmit & receive test !]
	COMPLETED Repeat count	=	00000
	Error count	=	00000
	LOOPBACK TEST
	100Mbps Auto-negotiation TxRx Test

Destination Address	=	xxxxxxxxxxxx
Source Address	=	xxxxxxxxxxxx

** 100Base-TX Full-Duplex ** < TRANSMIT >

< RECEIVE >

NOTE: The menu displayed by your computer may be slightly different from the one shown above.

If a defective is found, NG message will appear in the display.

3-72 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)