Toshiba M10, TECRA Bluetooth module Replacement Procedures, Removing the Bluetooth module

4.28 Bluetooth module 4 Replacement Procedures

4.28 Bluetooth module

Removing the Bluetooth module

To remove the Bluetooth module, follow the steps below and refer to Figure 4-53.

1.Lift up the hook and slide the Bluetooth holder in the direction in the figure below to remove it from the guides.

2.Remove the Bluetooth module from the guides.

Bluetooth holder

Bluetooth module

Hook

Bluetooth harness

Guide

Guide

Guide

Figure4-53 Removing the Bluetooth module

Installing the Bluetooth module

To install the Bluetooth module, follow the steps below and refer to Figure 4-53.

1.Set the Bluetooth module along the guides and arrange the Bluetooth harness under the guides.

2.Set the Bluetooth holder under the guides and slide it until the hook is engaged.

TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-83