![](/images/new-backgrounds/1184352/184352435x1.webp)
3 Tests and Diagnostics | 3.31 SETUP |
6.Configuration
This option lets you set the device configuration.
All Devices | BIOS sets all devices. |
Setup by OS | Initializes devices, which is needed to load an operating |
| system. Operating system initializes other devices. |
| (Default) |
NOTE: 1. When using installed OS, selecting “Setup by OS” is recommended.
2.When executing test programs, be sure to select “ALL Device”. And after the test end, select “Setup by OS”.
7.Battery
(a)Battery Save Mode
This option is used to select Full Power, Low Power or User Setting of the battery save mode. When you select the battery save mode, the followings will appear.
Full Power | The following shows full power settings. |
Low Power | The following shows low power settings. |
NOTE: Display of the LCD Brightness will be changed in the condition below: (*1) Operating the battery
(*2) Using the AC adapter
User Setting Use this option to set the battery save parameters on the
[CONFIDENTIAL] | TECRA M10 Maintenance Manual |