Toshiba M10, TECRA manual Robson card Replacement Procedures, Removing the Robson card

4.14 Robson card 4 Replacement Procedures

4.14 Robson card

Removing the Robson card

To remove the Robson card, follow the steps below and refer to Figure 4-24. 1. Remove the following screws securing the Robson card.

• M2.0⋅4B BIND screw ⋅2

2. Disconnect the Robson card from the connector on the system board.

M2.0x4B BIND

Robson card

Figure 4-24 Removing the Robson card

TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-41