Toshiba M10, TECRA manual Fin cover Replacement Procedures, Removing the Fin cover

4.6 Fin cover 4 Replacement Procedures

4.6Fin cover

NOTE: When repairing the PC, clean the cooling fin with a vacuum cleaner.

Do not use cotton sticks and tweezers to remove dusts. It may cause the cooling module problem or dusts stuffed.

Removing the Fin cover

To remove the Fin cover, follow the steps below and refer to Figure 4-9.

1.Push down the hook and remove the fin cover while sliding it in the direction in the figure below.

Hook

Fin cover

Figure 4-9 Removing the fin cover

Installing the Fin cover

To install the Fin cover, follow the steps below and refer to Figure 4-9.

1. Set the fin cover into the slot and slide it to engage the hook.

TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-21