Toshiba M10, TECRA manual Pci Bus

3.31 SETUP 3 Tests and Diagnostics

9.Drives I/O

This option displays the address and interrupts level for hard disk drive and optical disk drive. It is for information only and cannot be changed.

(a)Built-in HDD

This item displays the Serial ATA Port Number. It is for information only and cannot be changed.

Serial ATA Port0

(b)ODD

This item displays the Serial ATA Port Number. It is for information only and cannot be changed.

Serial ATA Port1

(c)eSATA

This item displays the Serial ATA Port Number. It is for information only and cannot be changed.

Serial ATA Port4

(d)SATA Controller Mode

This feature sets the SATA Controller Mode.

AHCISets AHCI which is the mode for VistaTM (default)

Compatibility Sets the mode for legacy OS. Use this mode when the driver corresponding to AHCI is not used.

10. PCI Bus

This option displays the interrupt level for the Card Bus in the computer. It is for information only and cannot be changed.

PCI BUS = IRQ10, IRQ11

11.Display

This group of options configures the computer’s display.

(a)Power On Display

This option is used to select the display when booting up.

Auto-SelectedSelects an external monitor if one is connected.

Otherwise it selects the internal LCD. (Default)

TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 3-93