Toshiba M10, TECRA manual MDC modem/USB board Replacement Procedures, Removing the USB board

4.17 MDC modem/USB board 4 Replacement Procedures

4.Disconnect the USB harness from the connector CN9560 on the system board and connector CN9660 on the USB board.

5.Remove the USB board from the slot of the base assembly while pushing the latches in the direction as shown in the figure below.

USB harness

USB board

CN9660

Latch

CN9560

Figure 4-32 Removing the USB board

TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-51