Toshiba TECRA, M10 manual Installing the Camera module/Wireless LAN antenna/3G antenna

4 Replacement Procedures 4.31 Camera module/Wireless LAN antenna/3G antenna

Installing the Camera module/Wireless LAN antenna/3G antenna

To install the camera module/wireless LAN antenna/3G antenna, follow the steps below and refer to Figure 4-60.

1.Stick new wireless LAN antennas in place.

2.Arrange the wireless LAN antenna cables in place.

3.Stick new 3G antennas in place.

4.Arrange the 3G antenna cables in place.

5.Peel off a protection sheet from a new camera module.

6.Connect the camera harness to the connector on the camera module and stick the camera module in place.

7.Arrange the camera harness in place.

8.Secure the wireless LAN antenna cables and camera harness with the insulators (ANTENA HLD INSULATOR) and acetate tapes.

4-94 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)