Toshiba TECRA Replacement Procedures PC card/Bridge media/Smart card, Installing the Bridge media

4 Replacement Procedures 4.4 PC card/Bridge media/Smart card

4.4.2Bridge media (SD Card/Memory Stick/xD Picture Card/MultiMedia card) Removing the Bridge media

To remove the Bridge media, follow the steps below and refer to Figure 4-5.

CAUTION: Insert or remove a Bridge media in accordance with any instructions in each Bridge Media manual or the manuals of the computer system you are using.

1.Push the Bridge media. It will pop out partly when you release, so pull out the card. (For an instance, SD card is described in the figure 4-5.)

Bridge media (SD card)

Figure 4-5 Removing the Bridge media

Installing the Bridge media

To install the Bridge media, follow the steps below and refer to Figure 4-5.

1. Insert the Bridge media and press it until it is securely connected.

4-16 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)