
4 Replacement Procedures | 4.29 Smart card unit |
4.29 Smart card unit
Removing the Smart card unit
To remove the Smart card unit, follow the steps below and refer to Figure
1.Peel off the insulator fixing the Smart card FPC.
2.Pull the Smart card FPC from the hole 1 out, then pull the Smart card FPC from the hole 2 out.
3.Lift up the hook of the Smart card unit in the direction as shown in the figure below to remove the Smart card unit from the guides.
Insulator
Smart card FPC
Hole2
Hole1
Hook
Guide
Smart card unit
Guide
Figure4-54 Removing the Smart card unit
| TECRA M10 Maintenance Manual |