Toshiba TECRA, M10 manual Figure below shows the name and position of each side

3 Tests and Diagnostics 3.20 ONLY ONE TEST

Subtest 7 Acceleration sensor

This subtest detects and corrects the each axis (X, Y, Z).

NOTE: Make sure that this subtest is executed on the following condition:

1.Flat desk with vertical plane to get the stability of machine.

2.The vertical wall or plane is necessary.

3.Prevent the machine from shake or shock.

<Example>

Set the machine

against the vertical planeVertical plane with the Front upward

Flat desk

The figure below shows the name and position of each side.

Top

(heaven surface)

Back Right side

Left side Front

3-46 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)