Toshiba TECRA, M10 manual Replacement Procedures Memory module, Removing the Memory module

4 Replacement Procedures 4.5 Memory module

4.5Memory module

Removing the Memory module

To remove the memory module, confirm that the computer is shut down. Then follow the steps below and refer to Figure 4-7 and 4-8.

CAUTION: When removing the memory module, make sure the computer is powered off. Removing a memory module with the power on might damage the module or the computer itself.

Do not touch the connectors on the memory module or on the computer. Dust and stains on the connectors may cause memory access problems.

Never press hard or bend the memory module.

1.Turn over the computer.

2.Loosen the screw fixing the memory cover.

3.Remove the memory cover.

Screw

Memory cover

Figure 4-7 Removing the memory cover

4-18 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)