Toshiba TECRA, M10 manual Installing the LCD mask

4 Replacement Procedures 4.33 LCD mask

Installing the LCD mask

To install the LCD mask, follow the steps below and refer to Figure 4-64 to 4-65.

1.Set the LCD mask to the hinge standing.

2.Lay the LCD mask down and secure it with the following screws.

CAUTION: When laying the LCD mask down, hold the LCD mask with the hinge and lay them down carefully.

•	M2.5⋅4B	FLAT HEAD screw	⋅2
•	M2.5⋅6C	Tapping screw	⋅2

4-106 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)