Toshiba M10, TECRA manual Replacing 14.1-inch LG fluorescent lamp WXGA+

4.35 Fluorescent Lamp 4 Replacement Procedures

Assembly of Source PCB

1. Assembly of Source PCB & Cover shield(S)1.

CAUTION: Pressure or stress should not be given on Source COF & Source PCB. Usage of gloves with anti-electric discharge coating is recommended. To eliminate possible damage on circuits occurred by ESC.

2. Assembly of Cover shield (G)2.

CAUTION: Pressure or stress should not be given on Gate COF.

3.Assembly of Tape Adhesive3 used for Top case fixing.

4.Assembly of Tape Adhesive4 used for B/L Wire fixing.

CAUTION: Pressure or stress should not be given on Top case during this process.

Figure 4-87 Replacing 14.1-inch LG fluorescent lamp (WXGA+) (8)

TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-129