Toshiba TECRA, M10 manual Replacement Procedures Serial board, Removing the Serial board

4 Replacement Procedures 4.19 Serial board

4.19 Serial board

Removing the Serial board

To remove the serial board, follow the steps below and refer to Figure 4-35.

1.Disconnect the serial board FFC from the connector CN9520 on the system board.

2.Push the hook to release and remove the serial board from the slot of the base assembly.

3.Disconnect the serial board FFC from the connector CN9620 on the back of the serial board.

Serial board Serial board FFC

CN9520

Hook

CN9620

Figure 4-35 Removing the serial board

4-56 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)