Toshiba TECRA, M10 manual Printer Test

3 Tests and Diagnostics 3.2 Executing the Diagnostic Test

Set the highlight bar to 1, and press Enter. The following DIAGNOSTIC TEST MENU will appear:

TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX

DIAGNOSTIC TEST MENU :
1	- SYSTEM TEST
2	- MEMORY TEST
3	- KEYBOARD TEST
4	- DISPLAY TEST
5	- FLOPPY DISK TEST	[It is not supported]
6	- PRINTER TEST
7	– ASYNC TEST
8	- HARD DISK TEST
9	- REAL TIMER TEST
10	- NDP TEST
11	- EXPANSION TEST
12	- CD-ROM/DVD-ROM TEST
88	- ERROR RETRY COUNT SET [FDD & HDD]
99	- EXIT TO DIAGNOSTICS MENU

NOTE: Only when a 2nd HDD is installed in the computer, [There is a second hard disk] message appears in the display.

Functions 1 through 12 are the Diagnostic Tests. Function 88 sets the floppy disk drive and hard disk drive error retry count (0-255).

To exit the submenu of the Diagnostic Test and returns to the Diagnostics Menu, set the highlight bar to function 99 and press Enter.

3-6 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)