Toshiba M10, TECRA manual Fluorescent Lamp Replacement Procedures

4.35 Fluorescent Lamp 4 Replacement Procedures

4.35.1Replacing the 14.1-inch WXGA LG Fluorescent Lamp

CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid contaminating or damaging the LCD panel and backlight unit.

Removing the fluorescent lamp

To remove the 14.1-inch WXGA LG fluorescent lamp, follow the steps below and refer to figures 4-68 to 4-71.

Disassembly of outside tape/Cover shield

1. Disassembly of Tape Adhesive2 used for Top case fixing.

CAUTION: Pressure or stress should not be given on Top case during this process.

2. Disassembly of Cover shield (S)1.

CAUTION: Pressure or stress should not be given on Source PCB. Usage of gloves with anti-electric discharge coating is recommended to eliminate possible damage on circuits occurred by ESD.

Figure 4-68 Replacing 14.1-inch LG fluorescent lamp (WXGA) (1)

TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-111