Toshiba TECRA, M10 manual Replacing the 14.1-inch WXGA-CSV LG Fluorescent Lamp

4 Replacement Procedures 4.35 Fluorescent Lamp

4.35.4 Replacing the 14.1-inch WXGA-CSV LG Fluorescent Lamp

CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid contaminating or damaging the LCD panel and backlight unit.

Removing the fluorescent lamp

To remove the 14.1-inch WXGA-CSV LG fluorescent lamp, follow the steps below and refer to figures 4-88 to 4-91.

Disassembly of outside tape/Cover shield

1. Disassembly of Tape Adhesive2 used for Top case fixing.

CAUTION: Pressure or stress should not be given on Top case during this process.

2. Disassembly of Cover shield (S)1.

CAUTION: Pressure or stress should not be given on Source PCB. Usage of gloves with anti-electric discharge coating is recommended to eliminate possible damage on circuits occurred by ESD.

Figure 4-88 Replacing 14.1-inch LG fluorescent lamp (WXGA-CSV) (1)

4-130 [CONFIDENTIAL] TECRA M10 Maintenance Manual (960-685)