Toshiba M10, TECRA manual Removing the speaker, Installing the Speaker

4.15 Speaker 4 Replacement Procedures

3.Remove the speakers (left and right) from the speaker slots while pushing the guides and speaker harness from the slot.

Speaker (blue&black harness)

Speaker (red&white harness)

Speaker harness

Guide

Guide

Figure 4-27 Removing the speaker (2)

Installing the Speaker

To install the speaker, follow the steps below and refer to Figure 4-25 to 4-27.

1.Install the speakers (left and right) to the speaker slots.

2.Turn up the insulators and arrange the speaker cables into the slot.

3.Connect the speaker harness to the connector CN6150 on the system board.

4.Stick the two insulators (SQUARE INSULATOR) in place.

TECRA M10 Maintenance Manual (960-685) [CONFIDENTIAL] 4-45